Static grass applicator

[panzerman47]

I was lucky enough for Santa to bring me one. Has anyone had any experience with them?

I’ve had a mixed bag so far, and I’m not convinced that I’m doing it correctly. I’ve connected the crocodile to the base, the figure, a pin inserted into the base.
So far best results have been with the clip attached directly to the base.

Any help or tips greatly appreciated.

[CarlL]

Sorry can't help you!My applicator is a cardboard box and I just shake it! Low tech me!
CarlL

[granty101]

Sorry can't help you!My applicator is a cardboard box and I just shake it! Low tech me!
CarlL

Sometimes the old ways are the best ways Carl

Grant

[Seret]

I made my own:

http://tinyhordes.com/how-to-make-a-sta ... pplicator/

Previously I'd been using the "baloon and a jumper" method to get the grass to stand up after sprinkling it, this does a much better job. It's a bit surprising if you accidentally touch it though...

Thinning the PVA you're using for your grass right down helps. You need the PVA to become a decent enough conductor, and depending on how dilute it is coming out of the bottle it might not be conducting very well.

[freewargamesrules]

Very popular with the Miniature Railway enthusiasts. You can get some great results as long as you follow the manufacturers instructions.

[panzerman47]

Many thanx all, my experiments continue....