Factory ruin?

Discuss the society, wargaming, and other topics of interest
Richard B.
Posts: 869
Joined: 16 Mar 2012, 06:54

Re: Factory ruin?

Post by Richard B. »

CarlL wrote: 10 Dec 2019, 17:30 Richard
If you are thinking substantial ruins you might want to try out one or more of these as a starter:
CarlL

https://picclick.co.uk/20mm-Scale-Ruins ... 17613.html

http://minibits.net/news/2018-10-14/20m ... -released/

https://sarissa-precision.com/products/ ... -destroyed

https://sarissa-precision.com/collectio ... ory-b-20mm

PS
Of course access to foam board (and sharp knife for cutting ruined walls) and PVA glue and a mdf or hardboard or plywood base may be a cheaper start point?

Enjoy whatever you do and look forward to the photos.

CarlL
Thanks Carl, I`ve seen most of those, I am unsure if I want to down the "wooden-puzzle" route :D
"“Sir with the compliments of my officer, your shooting was excellent – you killed four of our men”!
Un-named Traillieur to an artillery officer at R`Fakah, Morocco, Feb. 29th, 1908
Richard B.
Posts: 869
Joined: 16 Mar 2012, 06:54

Re: Factory ruin?

Post by Richard B. »

This is my work in progress on a factory ruin of my own

Vac-u-form stone cladding affixed to 4mm hardboard with door and windows already cut - the bulldog clips are holding everything in place whilst the glue sets. These two walls will butt together along the straight edges, then i`ll add 2 partial floors plus rubble & detritus to the base. :D

Image
Image
"“Sir with the compliments of my officer, your shooting was excellent – you killed four of our men”!
Un-named Traillieur to an artillery officer at R`Fakah, Morocco, Feb. 29th, 1908
Post Reply