Search found 63 matches

by Leon Pendraken
Fri Apr 12, 2019 12:29 am
Forum: New Figure/Model Releases, Sales, Bargains
Topic: BKC-IV Starter Armies released!
Replies: 2
Views: 86

Re: BKC-IV Starter Armies released!

I am assuming that your use of units in advert above follows the convention (page 5 of BKC4) So where your ad says 5 units of tanks we are talking 5 tank models, I assume. Just dont want any potential customers to feel unit is more than one model. That's correct, there's a bit more info on the webs...
by Leon Pendraken
Wed Apr 10, 2019 9:43 pm
Forum: New Figure/Model Releases, Sales, Bargains
Topic: BKC-IV Starter Armies released!
Replies: 2
Views: 86

BKC-IV Starter Armies released!

After the release of Blitzkrieg Commander IV this past weekend, we've now got a selection of Starter army deals to get you going with your new rules! All of these packs contain a standard set of contents: 1 x CO/HQ unit (5 figures) 6 x Infantry units (30 figures) 1 x Mortars unit (3 mortars with cre...
by Leon Pendraken
Sat Mar 16, 2019 1:32 am
Forum: New Figure/Model Releases, Sales, Bargains
Topic: BKC-IV Released at Salute!
Replies: 4
Views: 172

Re: BKC-IV Released at Salute!

CarlL wrote:
Fri Mar 15, 2019 10:28 pm
Now how did I buy my BKC3 copy!
And shall I just wait and see if BKC4 pops thru my door.
Drop me an email if you're not sure and I'll check the replacement queue for you, no worries.
by Leon Pendraken
Thu Mar 14, 2019 11:54 pm
Forum: New Figure/Model Releases, Sales, Bargains
Topic: BKC-IV Released at Salute!
Replies: 4
Views: 172

BKC-IV Released at Salute!

https://pendraken.co.uk/ProductImages/BKCIVPromo.jpg After a lot of hard work and effort we are delighted to announce that BKC-IV will be officially released on 6th April 2019 , at the Salute show! Our revision team, led by Mark Fry, have put a tremendous amount of effort into fixing the mistakes o...
by Leon Pendraken
Sun Jan 06, 2019 5:08 pm
Forum: New Figure/Model Releases, Sales, Bargains
Topic: 3d modeller saying hello
Replies: 4
Views: 305

Re: 3d modeller saying hello

My guess is that the pricing is down to the time taken to print the model, which is the main downside to 3D printing and why it's not commercially viable yet. Even a small model like this might take 30 minutes to print, whereas a traditional spin caster could knock out over 100 per hour. I've seen s...
by Leon Pendraken
Tue Jan 01, 2019 8:34 pm
Forum: General Discussion
Topic: Happy New Year to all Forum users
Replies: 7
Views: 353

Re: Happy New Year to all Forum users

Happy New Year everyone!
by Leon Pendraken
Tue Jan 01, 2019 8:33 pm
Forum: New Figure/Model Releases, Sales, Bargains
Topic: Pendraken's 1092 Releases in 5 years!
Replies: 2
Views: 163

Pendraken's 1092 Releases in 5 years!

https://farm8.staticflickr.com/7893/32685949948_4cf20aa636_c.jpg We managed to hit a 4-figure releases total a few years ago but this time we've gone even further! After a very busy 2018 we've now released a massive 1092 new products over the last 5 years. The amount of time, money and effort that ...
by Leon Pendraken
Fri Dec 21, 2018 9:22 pm
Forum: New Figure/Model Releases, Sales, Bargains
Topic: Pendraken's 2018 Releases!
Replies: 45
Views: 3589

Re: Pendraken's 2018 Releases!

Our final release of 2018 adds a French five to the Modern Vehicles range with the addition of the AMX-VCI APC and the Panhard EBR armoured car. The AMX-VCI was an APC variant of the AMX-13 chassis, with around 3000 produced in a number of variants. We've got the three most useful types: - the VTT w...
by Leon Pendraken
Thu Nov 29, 2018 5:50 pm
Forum: General Discussion
Topic: Battleground - Sat 24th November, Stockton-on-Tees, UK
Replies: 39
Views: 2214

Re: Battleground - Sat 24th November, Stockton-on-Tees, UK

I think it's got to be worth a go...!